KSBI Facilities

TSR 125 ROLLER HEAD EXTRUDER

Equipment Description

Diameter of Screw
225mm (8.9”) inlet x 128mm (5.0”) outlet.

Width of Side Guide
300mm (11.8”). Note: The width of extruded rubber sheet may be 5~10% greater than side guide width.

Roll Gap
Minimum .078”
Maximum .236” (2~6mm) - Adjustable

Hopper Opening Dimensions
338mm x 332mm (13.3” x 13.1”).

Maximum Discharge Rate
Approximately 500 kg./hour (1100 lbs./hr.).

Drive DC Motors
Screw : 10 HP, 1750 RPM
(with field weakening from 1150 RPM).

Roll : 7.5 HP, 1750 RPM
with field weakening from 1150 RPM).

Output Speeds through Gearboxes
Screw : 0~30 RPM
Roll : 0~25 RPM

Outer Diameter of Calender Roll
177mm (7.0”)

Control System
Full PLC color touch screen control system; features automatic bank control system and full graphic manual machine interface.

Shape of sheet can be controlled optimum condition using tank load signal feed back and all the operation parameters such as screw/roll - speed/load, bank volume, etc. Can be shown and stored graphically and numerically.

Sheeting Water Bath
Stainless steel water bath and drying racks.